Rental Rates:

• Daily: $284.00
• Weekly: $850.00
• Monthly: $2,266.00

Details

• Horsepower range ……………………………………………………… 50 – 160 hp (37.3 – 119.3 kw)
• Gearbox horsepower ………………………………………………….. 540 rpm or 1000 rpm
  •  160 hp (119.3 kw) Divider and 130 hp (96.9 kw) Center & Wings
• Gearbox lubrication ……………………………………………………. Gear Lube 80-90W EP
• Gearbox oil capacity …………. Splitter: 3.5 pints (1.66 L); Center deck & Wings: 6 pints (2.84 L)
• Cutting capacity ……………………………………………………….. 3″ (7.6 cm)
• Machine weight
  • Total weight ………………………………………………………………… 4,380 lbs (1986.7 kg)
  • Tongue weight …………………………………………………………….. 1,594lbs (723.0 kg)
• Blade tip speed
  • At 540 rpm Center Blades = 15,268 FPM (77.6 mps) & Wing Blades = 15,000 FPM (76.2 mps)
  • At 1000 rpm Center Blades = 15,578 FPM (79.1 mps) & Wing Blades = 14,620 FPM (74.3 mps)
• Hitch types ……….. Swivel Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch
• Hitch jack …………………………………………………………………. Standard (7,000 lbs) (3175.1 kg)
• Signal lights ……………………………………………………………… LED (light-emitting diode)
• 7 Pin connector ……………………………………………………… SAE J560 pin configuration
• Cutting width …………………………………………………………. 15’-0″ (4.57 m)
• Overall width …………………………………………………………. 15’-10″ (4.83 m)
• Transport width with 21″ tires …… 10’-3″ (3.12 m) (Single acting fold option) 7’-3″ (2.21 m) (Dual acting fold option)
• Overall length ………………………………………………… 16′-3″ (4.95 m) (With center deck raised fully up)
• Deck height …………………………………………………… 12″ (30.5 cm)
• Cutting height ………………………………………………… 1-1/2″ – 16″ (3.8 cm – 40.6 cm) (Varies by tire option)
• Lift hydraulics ………………………………… 3″ x 8″ hydraulic cylinder, hoses, fittings & stroke control spacers
• Wing hydraulics ……………………………… 2 1/2″ x 12″ hydraulic cylinders, hoses & fittings
• Wing flex while operating:
  • Max. 20 degrees down, can float up as needed as long as the wheel(s) are still on the ground
• Wing transport protection ……………………………….. Wing Transport Lock Pins
• Deck material thickness …………………………………… 10 Gauge (3.4 mm)
• Side skirt thickness ………………………………………….. 1/4″ (6 mm) Steel
• Skid shoes
• Wing Deck: ………………………………………………………. 1 Replaceable skid shoe per wing
• Center Deck: ……………………………………………………. 2 Replaceable skid shoes
• Blades – 6 (2 per carrier)
  • 1/2″ x 4″ (1.3 cm x 10.2 cm) Heat-treated, free-swinging alloy steel with uplift
• Blade overlap …………………………………………………… 6″ (15.2 cm)
• Blade bolt ………………………………………………………… Keyed with hardened flat washer & locknut
• Stump jumper / blade holder
  • 3/16″ (5 mm) Thick round dish shaped pan, reinforced with 1″ x 4″ (2.5 x 10.2 cm) blade bar
• Front & rear guards …………………………………………… Optional single row chain or dual row chain
• Input driveline 540 & 1000 rpm …. Cat. 6 with constant velocity u-joint with or without overrunning clutch
  Intermediate driveline ………………………………………. Standard – Category 4 with slip-clutch
• Wing drivelines ……………………… Standard – Category 4 with slip-clutch or Category 5 with slip-clutch
• Wheel options
  • 21″ or 26″ Laminated tires
  • 25.5″ New foam filled tires
  • 25.5″ New 20-ply pneumatic tires
  • 29″ Used aircraft tires
• Number of wheels
  • 4 – Wheels: Two on transport axle and one on each wing axle
  • 6 – Wheel option: Four on transport axle and one on each wing axle
  • 8 – Wheel option: Four on transport axle and two on each wing axle
• Transport axle …………………………………………….. Spring-cushioned on center transport axle
• Hubs ………………………. Cast iron five-bolt hubs with tapered roller bearings and 1 3/4″ (4.4 cm) shafts
• LP Performance hitch & Bar tite hitch pivot shaft diameter …………………………………….. 2 1/4″ (5.7 cm)
• A-frame tongue ………………………………………………………. 5″ x 3″ (12.7 cm x 7.6 cm) rectangular tubing